Reloop TURN3 Belt-Drive Hi-Fi Turntable

The Reloop TURN3 is a belt-driven hi-fi turntable designed for music enthusiasts and vinyl playback. Its low-vibration DC motor helps minimise unwanted operating noise, while the straight tonearm provides precise tracking.

Electronic speed control allows 33, 45 or 78 RPM to be selected using the speed control knob without adjusting the belt. Shellac records can also be played when a suitable pick-up system is used.

A dedicated anti-skating wheel supports accurate tracking adjustment, while the GM/SME headshell locking mechanism makes it easy to change between cartridges mounted on compatible headshells. The manual arm lift provides direct control over cueing.

The integrated USB interface enables records to be digitised directly to a PC or Mac in CD quality. Semi-automatic operation stops the turntable at the end of a record and can be deactivated for fully manual playback.

Decoupled, shock-absorbing feet help isolate unwanted vibration. The heavy die-cast aluminium platter supports smooth rotation, with rubber damping beneath the platter adding mass and reducing unwanted resonance.

Gold-plated connections support clean signal transfer, and all cables are detachable. An integrated phono preamplifier allows connection to a line-level amplifier input without requiring a separate phono preamp.

The TURN3 has a sturdy MDF plinth with a piano finish and is described as being supplied with a pre-mounted Ortofon 2M Red pick-up system.

• Belt-driven hi-fi turntable
• Factory-fitted Ortofon OM10 cartridge
• Straight tonearm designed for precise tracking
• Manual arm lift
• Low-vibration DC motor
• Integrated motor control with speed switch for selecting 33 or 45 RPM
• External DC power supply
• Die-cast aluminium platter with chrome edging
• Adjustable anti-skating wheel system
• Gold-plated, corrosion-resistant connections
• Detachable cables
• Slimline wooden plinth with a matt black finish
• Power switch positioned on the lower side
• Includes turntable platter, dust cover, two dust-cover hinges, balance counterweight, phono RCA cable, DC power supply with international plugs, felt mat, instruction manual, Ortofon OM10 cartridge and headshell

Turntable type

Belt-driven analogue turntable system

Drive

Belt drive

Motor

DC motor

Turntable speeds

2 speeds: 33 1/3 and 45 RPM

Wow and flutter

0.2% WRMS

Signal-to-noise ratio

>65 dB, A-weighted

Tonearm type

Static-balanced straight tonearm

Effective tonearm length

224 mm

Overhang

19 mm

Tracking error angle

25°

Tracking force

1.5 g

Applicable cartridge weight

4–6 g

Anti-skating range

0–3 g

Platter material

Die-cast aluminium

Platter diameter

300 mm

Platter weight

550 g

Power supply

DC 12 V, 500 mA

Power consumption

6 W

Dimensions

420 W × 340 D × 121 H mm, including dust cover

Weight

Approximately 4.6 kg

Outputs

1 × gold-plated phono output

Earth connection

1 × GND earth terminal

Included accessories

Turntable platter, dust cover, two dust-cover hinges, balance counterweight, phono RCA cable, DC power supply with international plugs, felt mat, instruction manual, Ortofon OM10 cartridge and headshell